Quick jetting spec question

Got questions? We got answers....
Post Reply
User avatar
Griffbones
Supporting Member II
Supporting Member II
Posts: 166
Joined: 07:44 pm Jun 05 2010
Country:
Location: Red Oak, Iowa

Quick jetting spec question

Post by Griffbones »

I have my 2006 KDX 200 jetted cleanly, so I'm good there. I was talking to a friend about jetting and he asked me how far I had to lean out my bike. I know what I have in the bike right now because I kept notes as to what I installed, I just don't remember what stock jetting was, do you guys happen to know? This is just a curiosity thing, not using this for anything else, it's just that my memory is not that good anymore and it aggravates me a little when I can't remember things. :?

Current jetting:
45 P
Stock needle (1174K ?) 2nd clip
152 main

Stock was:
? Pilot, absolutely don't remember!
Stock needle (1174K ?) 3rd clip right?
160 main right?

Thanks in advance: Griff
'83 CR60R Fully restored
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
User avatar
TWMOODY
Gold Member
Gold Member
Posts: 752
Joined: 08:10 pm Dec 01 2006
Country:
Location: Southeast , Michigan

Post by TWMOODY »

Pretty sure it was 48/160
User avatar
Griffbones
Supporting Member II
Supporting Member II
Posts: 166
Joined: 07:44 pm Jun 05 2010
Country:
Location: Red Oak, Iowa

Post by Griffbones »

Thank you very much! :grin:
'83 CR60R Fully restored
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

When in doubt look at the fiche
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
User avatar
Griffbones
Supporting Member II
Supporting Member II
Posts: 166
Joined: 07:44 pm Jun 05 2010
Country:
Location: Red Oak, Iowa

Post by Griffbones »

>|<>QBB<
Mr. Wibbens wrote:When in doubt look at the fiche
No kidding, you don't think I thought of that?

The fiche lists all jet sizes as options, it did not state what sizes were installed from the manufacturer.
'83 CR60R Fully restored
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
Post Reply