I have my 2006 KDX 200 jetted cleanly, so I'm good there. I was talking to a friend about jetting and he asked me how far I had to lean out my bike. I know what I have in the bike right now because I kept notes as to what I installed, I just don't remember what stock jetting was, do you guys happen to know? This is just a curiosity thing, not using this for anything else, it's just that my memory is not that good anymore and it aggravates me a little when I can't remember things.
Current jetting:
45 P
Stock needle (1174K ?) 2nd clip
152 main
Stock was:
? Pilot, absolutely don't remember!
Stock needle (1174K ?) 3rd clip right?
160 main right?
Thanks in advance: Griff
Quick jetting spec question
- Griffbones
- Supporting Member II
- Posts: 166
- Joined: 07:44 pm Jun 05 2010
- Country:
- Location: Red Oak, Iowa
Quick jetting spec question
'83 CR60R Fully restored
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
- Griffbones
- Supporting Member II
- Posts: 166
- Joined: 07:44 pm Jun 05 2010
- Country:
- Location: Red Oak, Iowa
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
When in doubt look at the fiche
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- Griffbones
- Supporting Member II
- Posts: 166
- Joined: 07:44 pm Jun 05 2010
- Country:
- Location: Red Oak, Iowa
No kidding, you don't think I thought of that?Mr. Wibbens wrote:When in doubt look at the fiche
The fiche lists all jet sizes as options, it did not state what sizes were installed from the manufacturer.
'83 CR60R Fully restored
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)
'97 DR350 (407cc)
2005 KX85 (103.5cc)
2006 KDX 200 (Bone stock other than Jetting, Gnarley woods, Turbine Core II)
2007 250 XC-W (SX head)