Kdx 220 upgrade to RB Design, KLX forks, and boyseen reeds

Got questions? We got answers....
Post Reply
jdbarbor
Member
Posts: 1
Joined: 06:46 am May 15 2011
Country:
Location: York Pa

Kdx 220 upgrade to RB Design, KLX forks, and boyseen reeds

Post by jdbarbor »

After reading your post for awhile now I have decided to do some upgrades.
First I sent head and carb to RB Design, Mandatory upgrade from what I have read.
I got a gnarly desert pipe and FMF silencer.
I got Boyeseen 607 Reeds. First question, They look different, The stock ones are three pedals on each side, the 607's are a two piece one with three holes in it and a second one that lays over top of it. Fits fine just looks very different. Does this sound correct?
next question, I have a set of 2007 KLX 250 Front forks, They look like they would fit, should keep the softer ride for trail riding, and not have the extension hanging below the axle, Has anyone had any experience with this conversion, Thanks for your advise
User avatar
sped66
Supporting Member
Posts: 427
Joined: 11:29 am Oct 09 2010
Country: USA
Location: Near Winston-Salem, NC

Post by sped66 »

Welcome to the site! I think both of your questions can be answered (with pics) in the forum if you do a search. Pictures are better than words for the reeds. Slick Nick did the KLX conversion & said everything was a bolt on affair if I remember correctly.
In the stable: '00 KDX220R, '02 XR250R
Gone but not forgotten: '80 XR80, '87 XR200R, '94 KDX250, '01 YZ426F, '86 XR220R
Post Reply