CDI compatability
-
- Member
- Posts: 49
- Joined: 01:23 pm Sep 26 2009
- Country:
- Location: Minnesota
CDI compatability
Does anyone know if any other CDI's can be used on the 1991-1994 KDX250? MIne went south and I am supposed to race on sunday...
Wherever you go......there you are
1993 KDX250
1997 KDX220 Street Legal !!
1993 KDX250
1997 KDX220 Street Legal !!
- fuzzy
- KDXRider.net
- Posts: 3437
- Joined: 01:29 pm Jun 18 2003
- Country:
- Location: Fredneck, MD
Yeah, pretty much anything that wires up exactly the same should work...Like a KX125/250, KDX200, etc. The CDI mapping/timing curve might not be the same, but the bike should still run decent (could even run better to your liking, or worse...LOL).
'91 KDX 200 Project $300 KDX
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
email this guy
http://www.dragonfly75.com/moto/
and get one for $55, with 4 map settings to mess with, best thing I've ever done to a bike!
http://www.dragonfly75.com/moto/
and get one for $55, with 4 map settings to mess with, best thing I've ever done to a bike!
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Gotta remember, the KDX CDI is set up with 2 different timing curves. One for when the KIPS are closed, and one for KIPS open. I think the change is at about 6k rpm. Slapping on a different one could have some pretty interesting results. I wonder that about the product moto_psycho is trying out as well. Did the designer consider this?fuzzy wrote:Yeah, pretty much anything that wires up exactly the same should work...Like a KX125/250, KDX200, etc. The CDI mapping/timing curve might not be the same, but the bike should still run decent (could even run better to your liking, or worse...LOL).
http://www.dragonfly75.com/motorbike/4curves.html
these 4 curves in conjunction with altering the stator to suit should give you the info you need
these 4 curves in conjunction with altering the stator to suit should give you the info you need
-
- Member
- Posts: 49
- Joined: 01:23 pm Sep 26 2009
- Country:
- Location: Minnesota