PWK35 maximum bore?

Got questions? We got answers....
Post Reply
moto_psycho

PWK35 maximum bore?

Post by moto_psycho »

Anyone taken the PWK35 past 36mm? Just wondering if its possible.
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Post by Julien D »

Dunno, but I'm not sure you'd want to in any case. Might kind of be like putting a 750CFM DP on a mildly cammed 4.8l small block. Too much airflow is counterproductive. A 600CFM would be much more appropriate. Pretty much like a 35 or 36 with divider is more appropriate to your KDX. Worth experimenting though if you can afford another carb. Or bore it way over and make some sleeves to change bore on the fly. Now THAT would be cool ;).
User avatar
David_L6
Gold Member
Gold Member
Posts: 235
Joined: 01:07 am Jun 04 2010
Country:
Location: Northwest Louisiana

Post by David_L6 »

Plenty of 38mm carbs around. Try one and see if you can get the jetting worked out and how the carb performs before boring a 35mm.
2000 KDX200 / 2002 CR250 / 2003 CR250 / 2008 TT-R230 / 2011 Brute Force 750 / 2012 Brute Force 750 EPS
Post Reply