Page 1 of 1
rear brake mount
Posted: 11:42 am Apr 10 2011
by stomlinson
on my 1990 kdx 200 a rock smashed the bottom off my rear brake mount so now my caliper can lift. its the part that your rear axel goes through and it slides onto a a fixture on the inside of the swingarm. now im having trouble finding a used one, does any one know if there is a KX one thats the same because there are lots of kx ones on ebay
Posted: 11:53 am Apr 10 2011
by Julien D
probably unlikely. You can cross reference part numbers and see if you find a match.
Posted: 03:25 pm Apr 10 2011
by scheckaet
brake calipers are different
Posted: 04:06 pm Apr 10 2011
by rbates9
The Scotts rear rotor guard replaces that part on an H, I don't know if the H and the E are the same but it might be worth looking into a rotor guard also. There might be one of them out there.
Posted: 07:39 pm Apr 10 2011
by kdxquebec
I used a 220 (H) complete rear caliper and bracket (the part that your rear axel goes through and it slides onto a fixture on the inside of the swingarm)
Bolt-on mod on a E-series
Posted: 09:52 pm Apr 10 2011
by SS109
kdxquebec wrote:I used a 220 (H) complete rear caliper and bracket (the part that your rear axel goes through and it slides onto a fixture on the inside of the swingarm)
Bolt-on mod on a E-series
That is good to know.