It's been 6 or 7 years since I filed my basket, still looks pretty damn good to me
For The Naysayers
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
For The Naysayers
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
- kdxmaniac
- Supporting Member
- Posts: 595
- Joined: 09:01 pm May 24 2010
- Country:
- KDX Butterfly
- Queen B
- Posts: 2063
- Joined: 05:12 am Aug 04 2007
- Country:
- Location: Cedar Grove, Tennessee
- turtle
- Supporting Member II
- Posts: 460
- Joined: 02:00 pm Jun 21 2010
- Country:
- Location: Central IL
As a recent graduate of the basket filing academy myself, I am glad to see this. Thanks, Wib.
Butterfly, others can speak better to this than me but the basket he's talking about is the clutch basket. Simply put, it holds the clutch plates. Over time it becomes notched and your clutch plates cannot move as freely and have a harder time releasing fully. This results in clutch drag. Filing the notches out of the basket eliminates the issue.
Butterfly, others can speak better to this than me but the basket he's talking about is the clutch basket. Simply put, it holds the clutch plates. Over time it becomes notched and your clutch plates cannot move as freely and have a harder time releasing fully. This results in clutch drag. Filing the notches out of the basket eliminates the issue.
Bill
Central IL
2004 KDX220R
2011 Triumph Tiger 1050 SE
Central IL
2004 KDX220R
2011 Triumph Tiger 1050 SE
- SS109
- KDXRider.net
- Posts: 5789
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Nay I say!
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
- kdxmaniac
- Supporting Member
- Posts: 595
- Joined: 09:01 pm May 24 2010
- Country:
-
- Platinum Member
- Posts: 644
- Joined: 07:46 am Nov 09 2009
- Country:
I just realized the last time I had my clutch apart that the shop manual for the E series KDX instructs that the last fiber plate (the one with the angled cuts into the fiber) goes into the notch at the top of the basket fingers, not aligned with the rest of the fibers. I see Mr. Wibbens's plates are not in that configuration, as are probably most of the E clutches out there. I was putting in my Dyna Ring at the time, so I didn't have a chance to assemble the clutch pack the recommended way to make a comparison. Does anybody think that it makes a difference?
David Eckel
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact: