Hi everybody from Scotland

Welcome to KDXRider.net! Please take a moment to introduce yourself, and meet the group.
User avatar
jstcraig
Supporting Member I
Supporting Member I
Posts: 144
Joined: 03:01 am Oct 17 2014
Country: Australia
Location: Perth WA AUS T.

Re: Hi everybody from Scotland

Post by jstcraig »

cornishwrecker220 wrote:Just a small note....

If I were you I'd place some clips on the oil feed pipe where it joins the brass knuckles ...this will ensure the oil pipe is a nice tight fit & won't allow any air in should the pipe harden over time .... The type of clips like the ones used on the carb overflow/breather pipe should be fine.
Yep that’s what has been previously used and will be on the replacement hose,thanks for the input [emoji1303][emoji1303][emoji1303]


Sent from my iPhone using Tapatalk
User avatar
jstcraig
Supporting Member I
Supporting Member I
Posts: 144
Joined: 03:01 am Oct 17 2014
Country: Australia
Location: Perth WA AUS T.

Re: Hi everybody from Scotland

Post by jstcraig »

Bugger I replaced the old hose with some 2.5 OD fuel hose and the friggin old clips are to big [emoji849]


Sent from my iPhone using Tapatalk
Post Reply