i picked up a well used 1990 kdx200 for my stepson to ride. I've been riding myself since the 70's and have always liked these bikes. i just never ended up with one until now.
the kdx so far needed headset bearings, rear wheel bearings, shock mount bearings, and swingarm bearings.
i serviced the forks and shock. they still had the stock oil in them and the fork seals were blown. i rebuilt the front brake caliper, and it looks like i will need to rebuild the top end too. it blew only 124psi and i looked through the intake and the piston is scored up pretty bad.
anyway. i'll be asking some questions. have been lurking here for about 2 months now.
first KDX200
- KDXGarage
- KDXRider.net
- Posts: 14118
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: first KDX200
Cool. Welcome to the forum and congratulations on the KDX.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128