Looking at 96' KDX
-
- Member
- Posts: 2
- Joined: 09:14 pm Feb 07 2016
- Country:
Looking at 96' KDX
So to start off this bike is only 600 dollars and needs some engine work. Sounds decent. Well the headlight/plate is gone off the front. No kill switch. Handlebar mount is bent. Oh here is the best/worst part depending on viewpoiint. The engine is from an 86 kx250. Owner states it ran good, but was due for a top end rebuild and the crank seal was leaking. Based on the fact my goals were to make this thing street legal mainly for short commutes and trail riding im not so sure I shouldnt keep looking.
-
- Member
- Posts: 8
- Joined: 06:52 pm Aug 30 2015
- Country:
Re: Looking at 96' KDX
I personally would keep looking. For what you would end up putting into it you could probably get something that doesn't require as much work.
- Julien D
- KDXRider.net
- Posts: 5858
- Joined: 07:53 pm Nov 07 2008
- Country: USA
- Contact:
Re: Looking at 96' KDX
Pass.
-
- Member
- Posts: 2
- Joined: 09:14 pm Feb 07 2016
- Country:
Re: Looking at 96' KDX
I thought it seemed like a lot more than I wanted to deal with for the money. The seller says he didn't really want to budge and would just keep it if I don't buy it. Thanks guys.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country: