2004 KDX 220R restomod

Welcome to KDXRider.net! Please take a moment to introduce yourself, and meet the group.
Post Reply
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

Hi everyone my name is Jeremy.i I'm new to the forum.Last summer I inherited my father 's KDX after he had lost his battle to cancer. The bike , or the most part is stock( bars, sprockets chain and a 19in rear wheel) but runs well. I am planning on doing a full " frame off" restoration on the bike. I just do not know what is out there as far as swapping parts over from a kx250. It would be greatly appreciated if someone could point me in the right direction as to what can be swapped over.
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 2004 KDX 220R restomod

Post by Julien D »

Welcome to the forums. Very sorry to hear about your father. Cancer is a terrible thing.

As for KX250 parts to swap, pretty much nothing aside from the front forks will swap over, and that takes a bit of doing. You have to re-use the KDX steering stem, so it must be pressed into the KX lower triple.
Image
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: 2004 KDX 220R restomod

Post by bufftester »

Sorry to hear about your father.

As for the bike, if you are sold on a full resto you will not be using anything off a KX. If you want to restore it to the trail eating playbike it was always meant to be then look at 1.)replacing the OEM piston with an aftermarket (do it before it takes itself out of the game and costs a small fortune) 2.)getting the suspension set up properly for your weight and style of riding, 3.)get the head and carb worked by Ron Black, 4.) aftermarket pipe 5.)Rejet for all the mods, and finally 6.) ride the hell out of it in honor of your dad. BTW the KDX stock rear wheel was 18". Post some pics up!
User avatar
C George
Supporting Member II
Supporting Member II
Posts: 550
Joined: 04:50 pm May 09 2013
Country:
Location: Vermont

Re: 2004 KDX 220R restomod

Post by C George »

We have a pair of 220's with all the above and a little custom intake porting by myself.

A very nice project bike and after your done , I'm sure it will be a keeper.

Buy a good pipe and use the stock silencer.
05 KDX-220R / 06 KDX-225R / Maxima 927 / Millenium Tech / Ron Black / PC , FMF / Many 220 engine mods / 40 + yrs. of riding dirt bikes 🤟🤟
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

Thanks for all your input guys I appreciate It. I found and trued up the stock 18in rim. I did plan on doing a top end and clutch to start and go from there. I've done some searching and I can't seem to find a rear fender with out a tail light anyone know if it's possible to get one?
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: 2004 KDX 220R restomod

Post by Julien D »

Image
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

Thank you
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

http://m.imgur.com/account/Jmarks93/images There's a few pics I took while I took the tank and plastics off today,going to wash it tomorrow. Happy fourth!
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: 2004 KDX 220R restomod

Post by 6 Riders »

Can't access the pictures
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

Re: 2004 KDX 220R restomod

Post by Jeremym1993 »

Sorry I had the profile as private.. Not the most computer savvy person.
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

I got a few parts(doing small things at a time just started a new job)


Also started taking the stock wheels apart for new rotors and wheel bearings


I also drained the clutch fluid and most of the antifreeze. Once I get new clutch springs I will put the clutch in. Has anyone ever ran this tusk clutch? Looking for a set of clutch springs to pair with that clutch.
Jeremym1993
Member
Posts: 11
Joined: 11:17 am Jul 01 2015
Country:

2004 KDX 220R restomod

Post by Jeremym1993 »

Woke up this morning found this on eBay and had to buy it... Can't wait till it gets here http://m.imgur.com/account/Jmarks93/images/W5QEkTu
Post Reply