New Bike/Rider
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
New Bike/Rider
Hello KDXRIDER!
Last edited by Malarkey01 on 11:14 am Jun 13 2014, edited 2 times in total.
- bufftester
- Platinum Member
- Posts: 3461
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: 1996 KDX200 - New Bike/Rider
Welcome to the club. Clean looking 200 you picked up.
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
1996 KDX200 - New Bike/Rider
Thanks!
Last edited by Malarkey01 on 11:14 am Jun 13 2014, edited 1 time in total.
- rbates9
- Supporting Member II
- Posts: 3164
- Joined: 06:07 pm Apr 27 2010
- Country:
- Location: UPSTATE New York
1996 KDX200 - New Bike/Rider
At $1000 you did good as long as it runs and goes thru the gears. Anything else is just a bonus. But it all depends on the area.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
Welcome here,fellow kdx B.C. Guy! I recently joined the club as well,97 220, and this place is the bomb for info!! That's a good price for the bike,I paid 1200. Clean the carb,fresh gas and I'll bet you're good to go!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Awesome! Ya this place is great! So how recently did you purchase that bike?
Last edited by Malarkey01 on 11:15 am Jun 13 2014, edited 1 time in total.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
Yes I bought the bike from aldergrove,did you look at it? His brother has/had a 200 for sale but the black box had crapped out on it when I got mine. I've had it out once since I got it and it goes like stink!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Haha that is hilarious! I looked at both bikes! He had a 96 a the one I bought and 97- one you bought. Didn't know about the other 200. I bought this one and regret it cause. It's not in as good of shape as it appeared and doesn't run great :(. I shoulda bought your 220! Haha anyways. Make sure you pull the bike apart. These guys did no maintenance on the one I bought....I also found the guy pretty....rude to deal with. I dunno what his problem was
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Where do you live and where do you ride?
Last edited by Malarkey01 on 11:15 am Jun 13 2014, edited 1 time in total.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
That's to funny, I live in Richmond and ride out at triangle road in Richmond for a after work ride, and up around Squamish with a guy from work I want to ride vedder river area and up around hope I hear is quite good.
I pulled the bike apart when I got it home and the air filter was not good. I expect problems with old dirt bikes so I had low expectations as I was pulling it apart.
I wanted a 220 from what I read on here and when that one came up and it had a pipe on it, I was sold!
I pulled the bike apart when I got it home and the air filter was not good. I expect problems with old dirt bikes so I had low expectations as I was pulling it apart.
I wanted a 220 from what I read on here and when that one came up and it had a pipe on it, I was sold!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Thats great! Ya, i'm hoping to get out in the valley out to Cultus late and Vedder Mountain. There are tons of trails out there apparently.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
1996 KDX200 - New Bike/Rider
I took mine out on Saturday, and it started to blubber under 1/2 throttle, ran clean up high. It was rideable,had to do a lot of throttle blipping to "clean it up" or it would stall? I thought maybe I hit the idle screw with my boot, was not that. When I finished riding and was loading up I noticed gas was coming out of the vents!
Take the carb apart today and the plunger in the float valve was stuck, do hope that was the problem.
Take the carb apart today and the plunger in the float valve was stuck, do hope that was the problem.
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Did you take a look at the jets? What jets are in there? I'm curious to know what yours are as we are in the same area...and what fuel mixture you run?
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
I took the carb apart and found the plunger on the float seat stuck. Seems ok now. It has a 135 main and a 42 pilot and I'm running 32-1. Oils cheap, and I'd rather spend a little more on oil and a little less on a rebuild? I'm heading up to the Chief in Squamish on Thursday!! Coild be the last nice day so a bud and myself are heading up!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Nice!
Ok, that is bizare.
Ok, that is bizare.
Last edited by Malarkey01 on 11:16 am Jun 13 2014, edited 1 time in total.
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
That's a big main, I have a owners manual that I'll look at when I get home and it will tell me what your jet sizes are stock!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
Thanks! I ride at elevation here....so like 0-100ft and then up at the cabin so around 3000ft. so need to have/change jets for both conditions i guess
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Ride
Hi, according to my manual it does not specify a jet size but under optional parts the main jets for your bike are , 155,158,162 and 165 and the slow jet is 42,45,50 and 52! The 220 which has a smaller carb main jets start at 140,142,148 and 150 while the slow jet is 38,40,45 and 48!
I would think you'd be going up 1 or 2 sizes on the main up at your cabin! Fun eh!
I would think you'd be going up 1 or 2 sizes on the main up at your cabin! Fun eh!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Supporting Member II
- Posts: 342
- Joined: 11:20 pm Jul 23 2013
- Country:
Re: 1996 KDX200 - New Bike/Rider
Oh and by the way, I'm heading up to Squamish tomorrow to go riding!!
97-220 with a PC pipe. 2015- RB carb and head mod
-
- Member
- Posts: 31
- Joined: 11:29 pm Aug 30 2013
- Country:
- Location: USA
Re: 1996 KDX200 - New Bike/Rider
And man!! I would love to get out! Especially today - it's fantastic out there!
Last edited by Malarkey01 on 11:16 am Jun 13 2014, edited 1 time in total.