Page 1 of 1
New member with a 86 200 project.
Posted: 09:05 pm Dec 28 2012
by GKBO
That may be a touch ambitious.Look for my post in the air cooled section.now a bit about me,I'm a soon to be 54 year old 30+year veteran street rider.Wanting to see what I was missing I rented a bike at the local MX track this summer.That was a hoot so I've been on the hunt for a vintage dirt project since.Found I like doing up old bikes when I did this one
http://www.thegsresources.com/_forum/sh ... p?t=161477 then I got this one
http://www.thegsresources.com/_forum/sh ... p?t=176156 .I'm a bit of a Suzuki guy but I've had Honda's and Yamaha's to.This is my first Kawasaki and my first stoker since the old R5 Yamaha that was my first bike.
New member with a 86 200 project.
Posted: 08:49 am Dec 29 2012
by GKBO
Here's a link to the build thread
http://kdxrider.net/forums/viewtopic.php?f=119&t=13295 think I`m going to like it here.
Re: New member with a 86 200 project.
Posted: 09:48 am Dec 29 2012
by Julien D
Welcome! Looks like you've got your hands full there!! Good luck with it, hope we can help!
Re: New member with a 86 200 project.
Posted: 11:50 am Dec 29 2012
by GKBO
Thanks,I already seen a post about using a proper puller on the flywheel to save mucking up the magnets.Worth joining just for that.I'm going to need some help to as I'm pretty much a storker virgin
New member with a 86 200 project.
Posted: 03:12 pm Dec 29 2012
by SS109
The Kaw will treat you well if you do the same for it! Welcome to the wonderful world of the KDX!