Kdx250 F electrical specs

Discussion specific to KDX models not sold in the USA
Post Reply
Kenny
Member
Posts: 18
Joined: 06:19 am Mar 22 2016
Country:
Location: George, Western Cape, South Africa

Kdx250 F electrical specs

Post by Kenny »

Hi all,


Can anyone give me the reading i should get on my pick up coil, small black sealed unit with two wires coming out? White/green and white/red.

The bike is a KDX 250 F, a grey import to south africa and so no one in SA can help me.

My reading on the pick up unit is 520 ohms? Is that suppose to be ?


There is a photo of my unit.

http://s1077.photobucket.com/user/Kenny ... sort=1&o=0

Regards

Kenny.
User avatar
Jaguar
Supporting Member
Posts: 590
Joined: 01:32 am Jul 03 2013
Country: Paraguay
Location: Paraguay
Contact:

Re: Kdx250 F electrical specs

Post by Jaguar »

THERE is no real stress on that coil (unlike the stator coil) so you can assume that it's OK if you get a resistance reading.
Just go ahead and troubleshoot the ignition system as per my guide: http://www.dragonfly75.com/moto/fixing-ignition.html
Performance CDI -- KDX motocross mods -- the SR KDX -- expansion chamber analysis---> http://www.dragonfly75.com/moto/
dandan1903
Member
Posts: 7
Joined: 02:03 pm Nov 07 2016
Country: U.K.

Re: Kdx250 F electrical specs

Post by dandan1903 »

Hi kenny I have same model could you post a picture of your stator as I'm sure mine is wrong and not picking up thanks


Sent from my iPhone using Tapatalk
Post Reply