84 kdx200 stator mod... Now what?....
-
- Member
- Posts: 4
- Joined: 06:33 am Feb 14 2016
- Country:
84 kdx200 stator mod... Now what?....
So my flywheel blew up and I got a newer flywheel and clocked the staotor(fredette mod) now what? How do I orient the stator on the motor? Thanks!
- Jaguar
- Supporting Member
- Posts: 590
- Joined: 01:32 am Jul 03 2013
- Country: Paraguay
- Location: Paraguay
- Contact:
Re: 84 kdx200 stator mod... Now what?....
"clocked the stator"?
post a photo
post a photo
Performance CDI -- KDX motocross mods -- the SR KDX -- expansion chamber analysis---> http://www.dragonfly75.com/moto/
-
- Member
- Posts: 4
- Joined: 06:33 am Feb 14 2016
- Country:
Re: 84 kdx200 stator mod... Now what?....
Yes, I clocked the stator... I just don't know where to set it... The original timing you line up the mark on the stator to the mark on the case... Now with a clocked stator where do you set it? Is it just as simple as put it on there tighten bolts and that's it? Also, how do you post a pic? I tried but cannot get it to work thanks!
- kawagumby
- Gold Member
- Posts: 927
- Joined: 10:09 am Nov 30 2006
- Country:
- Location: California
84 kdx200 stator mod... Now what?....
I did some research on this a while ago...see the post below (C model using a later flywheel) that has some pictures for C model flywheel changeover. The rotation is 90 degrees, based on the Fredette stator mod for the C model, I'm sure the '84 is the same.
1994 KDX200, Beta 200rr, yz125, yz250, kx100 modded for adult, gasgas contact 250.
-
- Member
- Posts: 47
- Joined: 11:11 pm Oct 24 2016
- Country: United States
Re: 84 kdx200 stator mod... Now what?....
I know it's an old thread. But I just came upon a 1986 kdx 200 for almost nothing. Its mine so no backing out. When you say rotate 90 degrees do you mean clockwise? Or counter clockwise, common sense tells me clockwise, but I don't want my stator plate to be more like Swiss cheese than neccesary
-
- Supporting Member
- Posts: 103
- Joined: 04:34 pm Mar 24 2016
- Country:
84 kdx200 stator mod... Now what?....
Also a dead thread. But how much you you guys be willing to pay for a used flywheel from a 1984 kdx200. In good condition
-
- Member
- Posts: 47
- Joined: 11:11 pm Oct 24 2016
- Country: United States
Re: 84 kdx200 stator mod... Now what?....
I would have to see if an 84 would work on mine. But I would be willing to pay what the going rate for the next gen flywheel are going for. Like 60 bucks.
-
- Member
- Posts: 47
- Joined: 11:11 pm Oct 24 2016
- Country: United States
Re: 84 kdx200 stator mod... Now what?....
The problem with a used 1984 flywheel is that those magnets could let loose at any time. Now if it was new old stock you could probably get hundreds for it.
-
- Supporting Member
- Posts: 103
- Joined: 04:34 pm Mar 24 2016
- Country:
84 kdx200 stator mod... Now what?....
True. theres this one guy on this site that refurbishes them. I might just send it to him to have it re done. Anyway if anyone REALLLY needs one jsut lmk