Kdx200 with a 71.95mm piston?

Discussion specific to the 1989 - 1994 (E Series) KDX200 model sold in the USA
Post Reply
Erik225
Member
Posts: 2
Joined: 05:23 pm Sep 17 2018
Country: United States

Kdx200 with a 71.95mm piston?

Post by Erik225 »

I recently bought a 1990 kdx200. Its all marked as a 200 but it has a 71.95mm piston in it. From what i can find it shouldnt be possible and so far its impossible to find one. Does anyone know of pistons that over sized for kdx? Really appreciate any help. I expected this to be much easier
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Kdx200 with a 71.95mm piston?

Post by KDXGarage »

Welcome to kdxrider.net. :bravo:

I would assume you have a "240 overbore". Are there any distinguishing marks on the piston? Search for member, artstoy, post on such a similar situation from last week.

May I ask if the cylinder is sleeved or plated? Does it have the power valve system? Thank you.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply