1994 KDX 200 Graphic Template

Discussion specific to the 1989 - 1994 (E Series) KDX200 model sold in the USA
Post Reply
k2lvn
Member
Posts: 2
Joined: 12:34 pm Apr 19 2015
Country:

1994 KDX 200 Graphic Template

Post by k2lvn »

These are just the scans at the moment - I've been meaning to do this for the bike for the last 3 years, - so rather than wait until I have a chance to clean up and vector them....
Thought I would share here and again when I do eventually sort out.

The scans should be at 100% - but for reference the business card should be 85mmx55mm when you are sizing up. :)

Tank graphic just needs flipped for other side.
One of the side plastics was just off the top of the page- I'm working to top of page as size.
Rear plastics were too long for one bit of paper - so have the front edge separate. - note, one side has a rubber grommet in the middle vent.

Hope this helps.... I'll be doing the tail piece when the bike comes back from having the engine rebuilt.

EDIT: Link to Flickr photos.
https://flic.kr/s/aHsmgiyxTN
Post Reply