H hub on E kdx

Discussion specific to the 1989 - 1994 (E Series) KDX200 model sold in the USA
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

Im trying to fit a kdx 220 1997 rear hub on my 1994 kdx 200.

The caliper is touching the hub, what I can do to solve this problem?

Image

Image

Image

Image
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: H hub on E kdx

Post by 6 Riders »

Do you have the spacers in correctly? My wheels swap straight across from my E to H 200s.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

there is one seal and one spacer on each side, right ?
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: H hub on E kdx

Post by 6 Riders »

Yup.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

the disc seem too big
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

is this normal that the diameter on this hub where the brake disc sit is bigger thant my 1993 kdx hub ?
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

this is the H wheel I bought,

Image

Image

Image
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: H hub on E kdx

Post by 6 Riders »

Well, I just got home, went out to the garage and looked at the three H series rears that I have......Your wheel is not an H series rear wheel. Might be off of a KDX 250 or KX 125/250.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
newbbewb
Supporting Member II
Supporting Member II
Posts: 579
Joined: 12:20 am Jan 22 2012
Country:
Location: sw washington state

Re: H hub on E kdx

Post by newbbewb »

bummer if it doesn't fit, thats an aftermarket excel wheel. good stuff.
93 kdx200-Highly modified
89 kx125/kdx200E engine
Buelldustin@gmail.com
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: H hub on E kdx

Post by 6 Riders »

newbbewb wrote:bummer if it doesn't fit, thats an aftermarket excel wheel. good stuff.
Stock KDX rims are Excel Takagos, same thing as that one.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

where I can find a smaller brake disc that fit this hub ?
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: H hub on E kdx

Post by KDXGarage »

Stock KDX rims were NEVER Takasago Excel's. The rims might be made by the Takasago rim company, but they are NOT Excel models.

That does not look like the stock rotor for 1995+. What is the OD of the rotor?

How many feet do you think you will ride on that sprocket before the teeth fly off? That is horrible. :oops:

Are you sure the wheel is from a KDX? Does the hub have four digits on one of the inner flanges?
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
sarrant
Member
Posts: 463
Joined: 02:47 pm Aug 10 2012
Country: USA
Location: Sac, Ca

H hub on E kdx

Post by sarrant »

My '94 most def has Takasago Excels.
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

I dont see a four digit on the inner flange of the hub

I dont know why caliper dont fit, both wheel have same rotor diameter, its juste the inside diameter that are not the same ( diameter of the hub)

my 93 kdx 18'' vs the supposed to be 97 kdx 220 19''
Image

97 wheel hub dia. sproket size
Image

my 93 kdx wheel hub size sproket size
Image

my wheel rotor dia.
Image

ebay wheel rotor dia.
Image

my wheel bolt to bolt dia.
Image

ebay wheel bolt to bolt dia.
Image
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

Re: H hub on E kdx

Post by ladyboys »

Spotted these numbrr

Image
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

H hub on E kdx

Post by KDXGarage »

sarrant wrote:My '94 most def has Takasago Excels.
I was just saying that stock KDX rims were not Excel models made by the Takasago company. They may have come stock with Takasago OEM spec rims, but they did not come with the Excel model.

To the main poster, it is odd that it has a 19" rim / tie /etc. on a "supposedly" KDX wheel. Can you put a wooden dowel inside the hub and compare the two widths to see if that helps you? Maybe it is just too wide to work, even if it is an H hub??
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

seems to go on a yz...

I love ebay
sarrant
Member
Posts: 463
Joined: 02:47 pm Aug 10 2012
Country: USA
Location: Sac, Ca

H hub on E kdx

Post by sarrant »

Jason wrote:
sarrant wrote:My '94 most def has Takasago Excels.
I was just saying that stock KDX rims were not Excel models made by the Takasago company. They may have come stock with Takasago OEM spec rims, but they did not come with the Excel model.

To the main poster, it is odd that it has a 19" rim / tie /etc. on a "supposedly" KDX wheel. Can you put a wooden dowel inside the hub and compare the two widths to see if that helps you? Maybe it is just too wide to work, even if it is an H hub??
Mine are Takasago 'Excel' branded.
sarrant
Member
Posts: 463
Joined: 02:47 pm Aug 10 2012
Country: USA
Location: Sac, Ca

H hub on E kdx

Post by sarrant »

ladyboys wrote:seems to go on a yz...

I love ebay
Seems to be a clear case for a refund: Item does not match description.
ladyboys
Member
Posts: 32
Joined: 11:50 am Jan 28 2015
Country:

H hub on E kdx

Post by ladyboys »

sorry to go off topic but its the first time im doing a refund on ebay, will he pay me back the shipping cost ?


thank you
Post Reply