Page 1 of 1

fmf pipe not fitting

Posted: 11:15 am Mar 10 2018
by bike4500
Hi everyone. I have a 2002 kx 125 that i'm having a hard time fitting my fmf gnarly woods pipe in the frame. It's hitting the down tube before it will get into the engine. It seems to be about a 1/2 inch short even with the engine rotated as far is it will go. Should i just weld on a extension to the pipe? Thanks for your help.

Re: fmf pipe not fitting

Posted: 02:59 pm Mar 10 2018
by Timtee
Sounds like you dont have much choice on the extention.

Careful titling the engine too far forward.

fmf pipe not fitting

Posted: 12:04 am Mar 11 2018
by SS109
Yup, set the engine properly then make any mods you need to do to the pipe.

Re: fmf pipe not fitting

Posted: 07:31 pm Mar 11 2018
by bike4500
My brother inlaw is making me a extension tomorrow. Thanks guys.

Re: fmf pipe not fitting

Posted: 09:32 am Mar 18 2018
by bike4500
The pipe is all fitted up now. I did have to put a spacer in and bent the stinger up a little to fit a kx250 spark arrestor. thanks aric