kdxtreme's hybrid build

kdxtreme · Post by **kdxtreme** » 11:42 am Jul 18 2012

So I have the 2005 kx starter kit on the way. Also on the way 2009 kxf dlc coated complete forks, subframe 05 kx, radiators 05 kx, new warp 9 wheelset green hubs and black rims, all new plastic, have protapers and cycra handgaurds already, need to sell the TM 450 then I can pick up a KDX200 and the rest of the parts.

Tedh98 · Post by **Tedh98** » 11:51 am Jul 18 2012

Sounds like you are off to a good start.

Are the forks from a 250 or 450?

kdxtreme · Post by **kdxtreme** » 08:35 pm Jul 31 2012

Got the forks in hand now they are a straight bolt on.

will have pictures when the chassis is a roller.

kdxtreme · Post by **kdxtreme** » 07:34 pm Aug 24 2012

Bar mounts came in air box is here new renthall twinwalls, plastic is here, front brake on the way, also seat on the way, starting to look like a bike

kdxtreme · Post by **kdxtreme** » 07:35 pm Aug 24 2012

Tedh98 wrote:Sounds like you are off to a good start.

Are the forks from a 250 or 450?

They are off of a 250

kdxtreme · Post by **kdxtreme** » 10:48 pm Sep 21 2012

got gold on gold excel/talons on the way for good deal

then its a roller

kdxtreme · Post by **kdxtreme** » 09:19 pm Sep 22 2012

On the prowl for a doner finally.

kdxtreme · Post by **kdxtreme** » 11:27 am Sep 23 2012

Renthall twin walls, tm designworks chain guide,polisport mmx light, new cycra hand gaurds been changing it up a little as I go

waiting on a call back on a 2001 200

kdxtreme · Post by **kdxtreme** » 05:52 pm Sep 24 2012

scored a 99 220 with fredette kicker, ims shifter, rb mods and new front tire for cheap.

now its time

Post by **dfeckel** » 07:49 am Sep 25 2012

I'll probably get booted off the forum for saying this, but I want to check out that TM 450!

kdxtreme · Post by **kdxtreme** » 09:01 am Sep 25 2012

The TM is a sweet bike all hand made pics are on Tasky's Metric Cycle website under used bikes low hour bike still has stock plastic and alllof the switch gear is there for turn signals and horn still works.

kdxtreme · Post by **kdxtreme** » 05:22 pm Sep 26 2012

Motor in fredette kicker don't fit

marrk_us · Post by **marrk_us** » 11:16 am Sep 27 2012

kdxtreme wrote:Motor in fredette kicker don't fit

Ran into the same thing with the CR build, found a H series kicker, shortened it by 3/4" and fits nicely (someone on the site would probably make you a swap). The shorty kicker was too upright and hit the frame. Glad you got the engine fitted, with the CR an extra set of hands made it a lot easier. Looking forward to some pics

kdxtreme · Post by **kdxtreme** » 03:51 pm Sep 27 2012

I'm going to try clocking it forward first if no go then I'll be looking to trade.

kdxtreme · Post by **kdxtreme** » 06:29 pm Oct 01 2012

kdxtreme wrote:I'm going to try clocking it forward first if no go then I'll be looking to trade.

Its close now gonna grind it and fill with weld to build it back up on the inside. Working on the airbox also almost done with that. Pipe fits like factory just need to relocate the lower mount on the frame.

kdxtreme · Post by **kdxtreme** » 10:14 pm Oct 01 2012

teaser

more to come

marrk_us · Post by **marrk_us** » 10:45 am Oct 02 2012

Just waiting for an organ donor!

kdxtreme · Post by **kdxtreme** » 04:55 pm Oct 02 2012

Old pic it's fitted now welding this week hopefully.

kdxtreme · Post by **kdxtreme** » 07:15 pm Oct 02 2012

kdxtreme · Post by **kdxtreme** » 07:56 pm Oct 07 2012

Got it all welded up today time to put it all together.

KDXRIDER.NET

KDXRIDER.NET