Page 1 of 2
kdxtreme's hybrid build
Posted: 11:42 am Jul 18 2012
by kdxtreme
So I have the 2005 kx starter kit on the way. Also on the way 2009 kxf dlc coated complete forks, subframe 05 kx, radiators 05 kx, new warp 9 wheelset green hubs and black rims, all new plastic, have protapers and cycra handgaurds already, need to sell the TM 450 then I can pick up a KDX200 and the rest of the parts.
Re: kdxtreme's hybrid build
Posted: 11:51 am Jul 18 2012
by Tedh98
Sounds like you are off to a good start.
Are the forks from a 250 or 450?
kdxtreme's hybrid build
Posted: 08:35 pm Jul 31 2012
by kdxtreme
Got the forks in hand now they are a straight bolt on.
will have pictures when the chassis is a roller.
kdxtreme's hybrid build
Posted: 07:34 pm Aug 24 2012
by kdxtreme
Bar mounts came in air box is here new renthall twinwalls, plastic is here, front brake on the way, also seat on the way, starting to look like a bike
Re: kdxtreme's hybrid build
Posted: 07:35 pm Aug 24 2012
by kdxtreme
Tedh98 wrote:Sounds like you are off to a good start.
Are the forks from a 250 or 450?
They are off of a 250
kdxtreme's hybrid build
Posted: 10:48 pm Sep 21 2012
by kdxtreme
got gold on gold excel/talons on the way for good deal
then its a roller
kdxtreme's hybrid build
Posted: 09:19 pm Sep 22 2012
by kdxtreme
On the prowl for a doner finally.
kdxtreme's hybrid build
Posted: 11:27 am Sep 23 2012
by kdxtreme
Renthall twin walls, tm designworks chain guide,polisport mmx light, new cycra hand gaurds been changing it up a little as I go
waiting on a call back on a 2001 200
kdxtreme's hybrid build
Posted: 05:52 pm Sep 24 2012
by kdxtreme
scored a 99 220 with fredette kicker, ims shifter, rb mods and new front tire for cheap.
now its time
kdxtreme's hybrid build
Posted: 07:49 am Sep 25 2012
by dfeckel
I'll probably get booted off the forum for saying this, but I want to check out that TM 450!
kdxtreme's hybrid build
Posted: 09:01 am Sep 25 2012
by kdxtreme
The TM is a sweet bike all hand made pics are on Tasky's Metric Cycle website under used bikes low hour bike still has stock plastic and alllof the switch gear is there for turn signals and horn still works.
Re: kdxtreme's hybrid build
Posted: 05:22 pm Sep 26 2012
by kdxtreme
Motor in fredette kicker don't fit
Re: kdxtreme's hybrid build
Posted: 11:16 am Sep 27 2012
by marrk_us
kdxtreme wrote:Motor in fredette kicker don't fit
Ran into the same thing with the CR build, found a H series kicker, shortened it by 3/4" and fits nicely (someone on the site would probably make you a swap). The shorty kicker was too upright and hit the frame. Glad you got the engine fitted, with the CR an extra set of hands made it a lot easier. Looking forward to some pics
kdxtreme's hybrid build
Posted: 03:51 pm Sep 27 2012
by kdxtreme
I'm going to try clocking it forward first if no go then I'll be looking to trade.
kdxtreme's hybrid build
Posted: 06:29 pm Oct 01 2012
by kdxtreme
kdxtreme wrote:I'm going to try clocking it forward first if no go then I'll be looking to trade.
Its close now gonna grind it and fill with weld to build it back up on the inside. Working on the airbox also almost done with that. Pipe fits like factory just need to relocate the lower mount on the frame.
kdxtreme's hybrid build
Posted: 10:14 pm Oct 01 2012
by kdxtreme
teaser
more to come
Re: kdxtreme's hybrid build
Posted: 10:45 am Oct 02 2012
by marrk_us
Just waiting for an organ donor!
kdxtreme's hybrid build
Posted: 04:55 pm Oct 02 2012
by kdxtreme
Old pic it's fitted now welding this week hopefully.
kdxtreme's hybrid build
Posted: 07:15 pm Oct 02 2012
by kdxtreme
more
kdxtreme's hybrid build
Posted: 07:56 pm Oct 07 2012
by kdxtreme
Got it all welded up today time to put it all together.