220 Carb

Questions and Answers about the best carb and Head mods available for the KDX.
Post Reply
ThE_HAMMER
Member
Posts: 7
Joined: 07:39 pm Apr 19 2010
Country:
Location: Knoxville, TN

220 Carb

Post by ThE_HAMMER »

Hey has anyone experimented with putting a larger carb on a KDX 220r?
1997 KDX 220r
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

We do it all the time.... It's called an RB modded carb. :wink:
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
johnyblaze
Supporting Member III
Supporting Member III
Posts: 202
Joined: 12:23 am Nov 04 2009
Country:

Post by johnyblaze »

I just received my carb back from RB. It's so pretty that part of me wants to just set it on my desk as a paperweight and look at it all the time.

Hope it works as well as it looks.
1998 KDX220 with goodies
2002 KTM LC4E
2001 Suzuki Bandit 1200S
kevfort19
Member
Posts: 116
Joined: 06:32 pm Mar 31 2009
Country:
Location: québec. canada

Post by kevfort19 »

you will see this in a very short time:P be carefull to the front wheel it goes on the ground not in the air :wink:
KDX 220 2001 =)

Don'T drink and drive...just give some gas and fly :D
thegary
Member
Posts: 14
Joined: 12:44 pm Jun 05 2010
Country:
Location: wisconsin

Post by thegary »

I put a 35mm carb from a 200 on my 220 while I am waiting for my RB,ed carb to come back. The 35 makes a good improvement over the stock 33mm carb. I can hardly wait till my carb and head are back from RB. This 220 will be an animal. I can loft the front wheel in the first 4 gears now without even trying. Actually it is hard to keep it down in the first 3 gears. I put a gps on it and it will get 78mph the way it is, thats with a 35mm carb,fmf desert pipe and a rad valve. If anyone is interested in the 35mm it will be for sale in a couple weeks after I install my Wisco piston and RBed carb and head. It is jetted for 1000ft above sea level.
Post Reply