Oh WOW!
- Jeb
- Gold Member
- Posts: 1894
- Joined: 08:01 pm Jul 14 2006
- Country:
- Location: Cincinnati / Northern Kentucky
Oh WOW!
'Got the head/carb back from Ron and installed. I literally only had several minutes to give it a shot - almost didn't cause it was near dark and raining. Takes a little more to kick her over - hmm, COMPRESSION! 'Let her warm up for a while then took off down the gravel drive . . .
YES!! The power increase is immediately noticeable. 'Stong as a horse. Getting the front wheel off the ground - no sweat (I didn't mean to the first time )
This mod is fantastic!!
Man, this bike's gonna be a blast. 'Gonna have to find somewhere to get some more saddle time.
Ron, my hat's off to you - your work and service are a class act!!
YES!! The power increase is immediately noticeable. 'Stong as a horse. Getting the front wheel off the ground - no sweat (I didn't mean to the first time )
This mod is fantastic!!
Man, this bike's gonna be a blast. 'Gonna have to find somewhere to get some more saddle time.
Ron, my hat's off to you - your work and service are a class act!!
- thebleakness
- Member
- Posts: 535
- Joined: 02:08 am Sep 17 2006
- Country:
- Location: flagstaff arizona
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
- Jeb
- Gold Member
- Posts: 1894
- Joined: 08:01 pm Jul 14 2006
- Country:
- Location: Cincinnati / Northern Kentucky
-
- Member
- Posts: 166
- Joined: 01:52 am Mar 19 2006
- Country:
- Location: Colville, Washington
-
- Supporting Member II
- Posts: 31
- Joined: 12:28 am Jan 05 2007
- Country:
- Location: Detroit
- Jeb
- Gold Member
- Posts: 1894
- Joined: 08:01 pm Jul 14 2006
- Country:
- Location: Cincinnati / Northern Kentucky
'Rode it some more today, fellas. It was cold, snowy, windy, and I had no place to go but my gravel driveway but I couldn't help it . . .
Ended up turning the A/S in a little for the colder temps. Once warmed the bike ran so well. The increase in power delivery is unmistakeable and quite linear: acceleration is very proportional to throttle opening. I hunkered over the handlebars, shifting my weight forward as best I could and gave it a fistfull of throttle - while it was already moving a little - and it near instantaneously plowed a furrow in the gravel AND the front wheel lifted. YOWZA!! It still rides easy, too - I can still nurse it along nice and slow. I thought my throttle response was pretty good before - now it's superb.
I pretty much froze myself but it was worth it . . .
I am so looking forward to putting this thing through the paces and searching for that second sweet spot.
Geez, I'm rambling about it and I haven't even really rode the thing much at all!!!
Ended up turning the A/S in a little for the colder temps. Once warmed the bike ran so well. The increase in power delivery is unmistakeable and quite linear: acceleration is very proportional to throttle opening. I hunkered over the handlebars, shifting my weight forward as best I could and gave it a fistfull of throttle - while it was already moving a little - and it near instantaneously plowed a furrow in the gravel AND the front wheel lifted. YOWZA!! It still rides easy, too - I can still nurse it along nice and slow. I thought my throttle response was pretty good before - now it's superb.
I pretty much froze myself but it was worth it . . .
I am so looking forward to putting this thing through the paces and searching for that second sweet spot.
Geez, I'm rambling about it and I haven't even really rode the thing much at all!!!
-
- Member
- Posts: 126
- Joined: 04:26 pm Feb 14 2007
- Country:
I gotta get my carb sent off soon man, sounds like it really improved the overall power on your bike.
I really want to send my head off too, when you do this, does it require a new piston (topend job)? I have a 96 KDX 200 and it still has the factory piston in it . It needs to be rebuilt. I am pretty good mechanically but have never rebuilt a bike and don't even know where to start.
I wonder how much the carb and head mod help the 200 compared to the 220?
Jeb, what part of kentucky are ya from bud?
I really want to send my head off too, when you do this, does it require a new piston (topend job)? I have a 96 KDX 200 and it still has the factory piston in it . It needs to be rebuilt. I am pretty good mechanically but have never rebuilt a bike and don't even know where to start.
I wonder how much the carb and head mod help the 200 compared to the 220?
Jeb, what part of kentucky are ya from bud?
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
-
- Member
- Posts: 126
- Joined: 04:26 pm Feb 14 2007
- Country:
Thats what i like to hear KDXer. I didn't know if the carb mod would help that much since it is only being bored out one more millimeter, but thats not the only thing Mr. Black does to the carbs. Then i hear the head mod is really good too. Just gotta learn how to do a dang top end job on my bike. Is the wiesco piston the way to go, or should i got with a pro-x? thanks
- Jeb
- Gold Member
- Posts: 1894
- Joined: 08:01 pm Jul 14 2006
- Country:
- Location: Cincinnati / Northern Kentucky
What is it that tells you that you need a top end? I'd tend to think that you're on the right track - the bike is 10 years old - but if it's been barely/hardly ridden . . . but you don't need to change the piston just for the sake of having Ron do his work.jowens66 wrote:Thats what i like to hear KDXer. I didn't know if the carb mod would help that much since it is only being bored out one more millimeter, but thats not the only thing Mr. Black does to the carbs. Then i hear the head mod is really good too. Just gotta learn how to do a dang top end job on my bike. Is the wiesco piston the way to go, or should i got with a pro-x? thanks
Get a service manual if you don't already have it. You can get an online version for a year (link is top right of the site) - I did and it works out great.
The manual will give you the tolerances that you can check to establish the need for the piston change. And it will guide you through a top end change.
I changed mine last Sept/Oct (it is a 220 and OEM piston can be flawed, it wasn't a wear issue) and I put in a Wiseco. But that's a different situation - start a new thread in General Q&A on Wiseco vs. Pro-x
I don't consider myself mechanically inclined so if you are you'll be fine. When you get ready to make the change you'll get lots of help here, just ask
I live north of Louisville in La Grange. How 'bout you? If you're somewhat close I've got a feeling that there's a few KDX'ers in the general area that will end up ridin' together. Photoguy and Rick live within about an hour of where I do and a ride is bound to happen this spring!!