rejetting help

Questions and Answers about the best carb and Head mods available for the KDX.
Post Reply
guitarreaper
Member
Posts: 6
Joined: 04:23 pm Nov 29 2011
Country:

rejetting help

Post by guitarreaper »

Hey guys, I'm new to this and I was wondering if any of you could give me some advice on rejetting my '88 kdx 200. I have no idea where to start when it comes to needle size. As of now I believe I'm running stock jets with a dg pipe, boyesen power reeds, and I drilled some holes in my airbox. Any suggestions would be appreciated. Thanks
-Jake
User avatar
Julien D
KDXRider.net
KDXRider.net
Posts: 5858
Joined: 07:53 pm Nov 07 2008
Country: USA
Contact:

Re: rejetting help

Post by Julien D »

Everything you need to know to get started is contained here...

http://kdxrider.net/forums/viewtopic.php?f=105&t=12543

Post back with any specific questions. Jetting is a process. There really are no shortcuts here. While this sticky might seem long, it really doesn't take long to follow the steps.
Image
guitarreaper
Member
Posts: 6
Joined: 04:23 pm Nov 29 2011
Country:

Re: rejetting help

Post by guitarreaper »

Alright thank you I hopefully can get to work soon.
Post Reply