Kouba link works!!

Feedback on products.....
Post Reply
User avatar
Blazing Basqueo
Member
Posts: 12
Joined: 11:15 am Jan 18 2006
Country:
Location: Homedale, Idaho

Kouba link works!!

Post by Blazing Basqueo »

For any of you who are considering lowering your bike...the Kouba link system is inexpensive and works great. My boys like to ride the kdx but it was a little tall in the saddle for them. I bought a Kouba link for about $70 and lowered the bike about an inch. It took all of 30 minutes to do and is totally reversible in that time frame (they also offer links that lower over 2 inches). To compensate, you must raise the forks in the triple clamps a little.. but that is easy enough. Initially, I was concerned about suspension travel and stability at higher speeds...but my fears have proven to be unfounded. Further, I'm right at 6 foot and still find the bike to be comfortable to ride. As an added bonus, the bike seems handle better in tight situations...but that might just be in my head, as the kdx handles better than my crf450x in these anyway you slice it. :razz:

All-in-all, this is a great product for those who wish to lower their ride.
'05 CRF450X
'06 KDX200
'02 TTR125
'83 XR200r
'98 Polaris 400
GS
Member
Posts: 644
Joined: 11:33 pm Feb 17 2005
Country:
Location: Vancouver area, Canada

Post by GS »

Blaze, Which of the Kouba Links did you install? If there is no obvious loss in handling qualities, this might be of more help to me than the kids :lol:
User avatar
KDX220PHIL
Supporting Member I
Supporting Member I
Posts: 419
Joined: 08:31 am May 19 2005
Country:
Location: Nova Scotia, Canada

Post by KDX220PHIL »

Are they made of aluminum or steel?

I made some links out of 1/2" 6061 aluminum instead of the 1/4" steel. I am curious as to the danger factor with the slight loss of strength.
User avatar
fuzzy
KDXRider.net
KDXRider.net
Posts: 3437
Joined: 01:29 pm Jun 18 2003
Country:
Location: Fredneck, MD

Post by fuzzy »

My devol ones are aluminum, and I THINK the kouba ones are too. They are beefier in size than the steel ones to compensate--just like yours.
'91 KDX 200 Project $300 KDX
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
User avatar
fulltiltboogie
Supporting Member I
Supporting Member I
Posts: 107
Joined: 05:38 pm Nov 14 2004
Country:
Location: TN

Post by fulltiltboogie »

Besides lowering I swear the longer links makes the whole rear suspension work amazingly better.
User avatar
KDX220PHIL
Supporting Member I
Supporting Member I
Posts: 419
Joined: 08:31 am May 19 2005
Country:
Location: Nova Scotia, Canada

Post by KDX220PHIL »

I only have a few rides on mine since changing them but I do notice a big difference in the rear suspension- for the better, besides touching the ground.
GS
Member
Posts: 644
Joined: 11:33 pm Feb 17 2005
Country:
Location: Vancouver area, Canada

Post by GS »

Question: What length of link did all you happy folk install??
User avatar
KDX220PHIL
Supporting Member I
Supporting Member I
Posts: 419
Joined: 08:31 am May 19 2005
Country:
Location: Nova Scotia, Canada

Post by KDX220PHIL »

Think mine are 116mm , lowered the bike 1/2".
User avatar
Blazing Basqueo
Member
Posts: 12
Joined: 11:15 am Jan 18 2006
Country:
Location: Homedale, Idaho

Post by Blazing Basqueo »

I bought the kdx1 link. It reportedly lowers the bike 1.125 inches. There are 2 other links that lower more. They are made of aluminum and appear to be be of sufficient strength. I'm sure they have been tested thoroughly.
Here is the web site: <www.koubalink.com>

I have only taken the bike on 2 short rides, but I think it handles great and the suspension is as good if not better with this new addition. And like I said earlier, its cheap and easy to do.

There is a down side however. In my case, I may never get to ride the kdx again; unless I treat it as a mistress and take it out on a date...just me and her! :wink:
'05 CRF450X
'06 KDX200
'02 TTR125
'83 XR200r
'98 Polaris 400
User avatar
fuzzy
KDXRider.net
KDXRider.net
Posts: 3437
Joined: 01:29 pm Jun 18 2003
Country:
Location: Fredneck, MD

Post by fuzzy »

Besides lowering I swear the longer links makes the whole rear suspension work amazingly better.
That's why my WR was lowered...It wasn't for rider height issues...Apparently every 93-95 YZ250 (94-97 WR250) with a correctly working rear susp had this link. Maybe the KDX benefits from the same thing.
'91 KDX 200 Project $300 KDX
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
User avatar
Blazing Basqueo
Member
Posts: 12
Joined: 11:15 am Jan 18 2006
Country:
Location: Homedale, Idaho

Post by Blazing Basqueo »

Another plus I neglected to add earlier is that it makes it much easier to lift my tired and creaking bones over the fender bag when I mount up! :razz:
'05 CRF450X
'06 KDX200
'02 TTR125
'83 XR200r
'98 Polaris 400
summitrider04
Supporting Member I
Supporting Member I
Posts: 17
Joined: 01:51 am Feb 16 2010
Country:

Post by summitrider04 »

I'm short, (5'5" and 140lbs now after thanksgiving) and I lowered the bike with the koubalink 2 and set up the sag at 3.5" with gear (they recommend 3"). Also have one softer spring 4.8kg if I can remember. Anyways, I rode this thing for 2 years (sag set at 4" with softer spring) and now with the lowering link I'm way more confident on it. I still tippy-toe with both feet, but just being 1" lower so I can flat foot to kickstart is great. I would definitely recommend it.
User avatar
bcdonyo
Supporting Member
Posts: 271
Joined: 07:31 pm Nov 26 2008
Country:
Location: So. Nv.

Post by bcdonyo »

I bought my 200 with the #1 link and tried the #3 for my girlfriend, we both like the stock one better for the desert.
Post Reply