I now have the ultimate woods machine ;)
From this:
to this:
Installed KYB usd forks
FMF Gnarly woods pipe.
Need to do some finish work on the lower headlight bracket but otherwise it is done.
Fork upgrade done
- frankenschwinn
- Supporting Member II
- Posts: 482
- Joined: 01:20 pm Nov 28 2009
- Country:
-
- Supporting Member III
- Posts: 202
- Joined: 12:23 am Nov 04 2009
- Country:
That's an interesting routing for the brakeline. I was wondering what I could use to fix the lower end to the forkguard. Is that something you made yourself?
My alternative is to follow Indawoods plan and route the line through the lower guide and then fix it to nothing on the forkguard.
Good work. How does it feel?
My alternative is to follow Indawoods plan and route the line through the lower guide and then fix it to nothing on the forkguard.
Good work. How does it feel?
1998 KDX220 with goodies
2002 KTM LC4E
2001 Suzuki Bandit 1200S
2002 KTM LC4E
2001 Suzuki Bandit 1200S
- scheckaet
- KDXRider.net
- Posts: 3740
- Joined: 12:09 am Nov 10 2005
- Country:
- Location: edmond oklahoma
I used several zip ties on the inside of the fork guard, works fine, not as pretty though but does the job.
02 KX 200 hybrid: RB head and carb
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156
Sold ☹ DRZ 400 SM
bike build: http://www.kdxrider.net/forums/viewtopi ... ike+stable
bike profile http://www.kdxrider.net/forums/viewtopi ... 0709#30709
newb info: http://www.kdxrider.net/forums/viewtopi ... 57#p117919
jetting guide: http://www.kdxrider.net/forums/viewtopi ... 105&t=1156
- frankenschwinn
- Supporting Member II
- Posts: 482
- Joined: 01:20 pm Nov 28 2009
- Country:
I used a small piece of Alum angle and riveted it to the fork guard. Put rivets in from the backside so that they dont protrude and scratch the slider. then used the stock cable clamps bolted to the angle.johnyblaze wrote:That's an interesting routing for the brakeline. I was wondering what I could use to fix the lower end to the forkguard. Is that something you made yoursel
My alternative is to follow Indawoods plan and route the line through the lower guide and then fix it to nothing on the forkguard.
Good work. How does it feel?