I was wondering if the few dozen or so KDX-to-KX fork modders have considered getting stickies to put on their radiator shrouds or other places.
Some of the graphics shops on the web say they do custom work. If group of six or a dozen of us went in on a buy, that might bring the cost down.
I even looked at getting a sticker from a radio station (KDKX) but it turns out it is an airport radio station in Knoxville. :(
KXDX is a radio station in Texas ... http://www.kxdxfm.com/page4.html
Maybe they have some stickies they can send us?
Any thoughts?
Rick
KD/KX graphics?
-
- Member
- Posts: 524
- Joined: 08:51 am Jun 29 2006
- Country:
KD/KX graphics?
I done KX-ed QuailChaser's KDX220R
-
- Member
- Posts: 524
- Joined: 08:51 am Jun 29 2006
- Country:
Shroud graphics aren't cheap. Especially custom ones. $65+ as I've seen them.
Shroud graphics would be my choice, but other options are possible.
Little stickers (say, round, six-inch in diameter) would be cheap, but they'd cover up number plates on the sides, for example.
So, what would you want on the stickers (be they shroud or other)?
KDKX?
KDX/KX
Fork U?
Rick
Shroud graphics would be my choice, but other options are possible.
Little stickers (say, round, six-inch in diameter) would be cheap, but they'd cover up number plates on the sides, for example.
So, what would you want on the stickers (be they shroud or other)?
KDKX?
KDX/KX
Fork U?
Rick
I done KX-ed QuailChaser's KDX220R
-
- Member
- Posts: 524
- Joined: 08:51 am Jun 29 2006
- Country:
They can make them anyway you want. But number plates have to comply with the color scheme for A, B, and C class. C class has a white background, B is yellow (I think), and A is (red?).
I think those requirements for racers would cause them to have to tread carefully, or to have a separate set of plastics. That's why I'd like to get stickies for the radiator shrouds.
Rick
I think those requirements for racers would cause them to have to tread carefully, or to have a separate set of plastics. That's why I'd like to get stickies for the radiator shrouds.
Rick
I done KX-ed QuailChaser's KDX220R