Page 1 of 1
KX fork identification help!!
Posted: 10:38 pm May 25 2023
by jaunt
Re: KX fork identification help!!
Posted: 09:24 am May 26 2023
by KDXGarage
I smell Yamaha.
Do some legwork on that fork guard, then report back. I think 2004 was the first year for 48 mm on Yamaha.
You almost had me thinking they were KX Forks. I got to watch you. :-)
Re: KX fork identification help!!
Posted: 09:31 am May 26 2023
by jaunt
KDXGarage wrote: ↑09:24 am May 26 2023
I smell Yamaha.
Do some legwork on that fork guard, then report back. I think 2004 was the first year for 48 mm on Yamaha.
You almost had me thinking they were KX Forks. I got to watch you. :-)
Haha yeah i dont even know if they're KX forks...
I'll try to look for some kind of markings.
Re: KX fork identification help!!
Posted: 02:37 pm May 26 2023
by KDXGarage
They could be 2004 YZ or 200x WR. 2005 and newer YZ125 and YZ250 have dual chamber forks.
EDIT ADD ON: See about 2005 - 2006 WR250F / WR450F. I am not sure if / when the WR line went to twin chamber.
Re: KX fork identification help!!
Posted: 02:15 pm May 27 2023
by jaunt
KDXGarage wrote: ↑02:37 pm May 26 2023
They could be 2004 YZ or 200x WR. 2005 and newer YZ125 and YZ250 have dual chamber forks.
EDIT ADD ON: See about 2005 - 2006 WR250F / WR450F. I am not sure if / when the WR line went to twin chamber.
Check this out
- 20230527_131340.jpg (3.53 MiB) Viewed 3696 times
Re: KX fork identification help!!
Posted: 11:36 pm May 27 2023
by KDXGarage
Yep. Look on eBay for used forks that match.
Re: KX fork identification help!!
Posted: 11:10 am Jun 14 2023
by jaunt
Well I think Im going to do the yz fork swap, i discovered the new triple clamps that they came with already have a kdx stem pressed in, so yeah thats easy now. I have the wheel and everything.
I need to get the forks sent off and overhauled first but i will update this when possible.
- 20230613_212246.jpg (3.19 MiB) Viewed 3630 times
- 20230613_211747.jpg (2.96 MiB) Viewed 3630 times
- 20230613_211758.jpg (2.62 MiB) Viewed 3630 times
Re: KX fork identification help!!
Posted: 11:27 am Jun 14 2023
by KDXGarage
Wow. That is pretty good! Let us know how it turns out.
Re: KX fork identification help!!
Posted: 06:29 am Jun 15 2023
by SS109
Awesome! What offset do those aftermarket clamps have?