Rmz fork swap?
-
- Member
- Posts: 68
- Joined: 08:41 pm Apr 11 2016
- Country:
Rmz fork swap?
Hey everyone! I have a chance to buy a full front end from a rmz250. Was wondering if this fork swap can be done or if I should just wait for a kx/kxf to be parted out. The entire bike is still there as far as I know right now so quick answers would be appreciated as this bike probably won't last too long. I have an 04 kdx220. Thanks! :)
2004 KDX220R. I'm Canadian eh.
-
- Member
- Posts: 68
- Joined: 08:41 pm Apr 11 2016
- Country:
-
- Supporting Member I
- Posts: 803
- Joined: 08:46 pm Nov 22 2015
- Country:
Re: Rmz fork swap?
They're good forks from what I've read. Cross check your stem bearings, stem length, and fork lengths, but if I had a good deal on the rmz I think I'd go for it.
"Fun Wheel Drive"
"Fun Wheel Drive"
- KDXGarage
- KDXRider.net
- Posts: 14047
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Rmz fork swap?
It will work. I think a few on here have done it.
Stem swap, pull em up or shorten em down, will need some material inside the upper clamp stem hole to take up the slack
normal issues covered here for 12 years
Stem swap, pull em up or shorten em down, will need some material inside the upper clamp stem hole to take up the slack
normal issues covered here for 12 years
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 68
- Joined: 08:41 pm Apr 11 2016
- Country:
Re: Rmz fork swap?
When you say stem swap what stem do I need to use? The stock kdx stem?Jason wrote:It will work. I think a few on here have done it.
Stem swap, pull em up or shorten em down, will need some material inside the upper clamp stem hole to take up the slack
normal issues covered here for 12 years
2004 KDX220R. I'm Canadian eh.
-
- Supporting Member I
- Posts: 803
- Joined: 08:46 pm Nov 22 2015
- Country:
Re: Rmz fork swap?
I would guess the kdx stem as it'll be correct for your steering head.
"Fun Wheel Drive"
"Fun Wheel Drive"
- KDXGarage
- KDXRider.net
- Posts: 14047
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Rmz fork swap?
1992+ KX125 / KX250, etc. stems are larger in diameter at the upper bearing. Their upper bearing is larger too. One cannot use the top bearing in the KDX / KLX / KX500 head tube.
People usually use the KDX stem.
scrandy, there are a TON of threads on here detailing it and people who have done it describing their experiences. I think the fork conversion subforum was made in very late 2004 or very early 2005, so about 12 years worth.
People usually use the KDX stem.
scrandy, there are a TON of threads on here detailing it and people who have done it describing their experiences. I think the fork conversion subforum was made in very late 2004 or very early 2005, so about 12 years worth.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 68
- Joined: 08:41 pm Apr 11 2016
- Country:
Rmz fork swap?
Hey thanks for the help everyone but bad news, was talking to buddy about it today and the only things I needed are what was bought so far. was everything I needed. Literally everything else is there accept the stuff I need lol That must just be pure bad luck for me.
2004 KDX220R. I'm Canadian eh.
- KDXGarage
- KDXRider.net
- Posts: 14047
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Rmz fork swap?
UGH! Bad luck!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128