I'm trying to figure out which forks are on my 02kdx220. It appears to me that since the odometer gear is there, that its a stock hub/wheel so this would indicate klx forks correct? The axle doesn't seem to be that of a kx. I was unable to find any usable part numbers, any help is greatly appreciated. Here are the pictures:
[/url[url=http://postimg.org/image/ofht6wfm1/][/url[url=http://postimg.org/image/h7k8k8htz/][/url[url=http://postimg.org/image/n9fazjwad/][/url[url=http://postimg.org/image/65twna92f/]
Fork/hub swap identification
-
- Member
- Posts: 45
- Joined: 09:01 am Dec 09 2015
- Country:
- Location: Pittsburgh, Pa
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Fork/hub swap identification
tiny pictures
If there is only an air valve on top, then they are NOT KX forks. If it is just an air valve (pressure release) in the center, then they are KDX / KLX, if they are Kawasaki forks.
If there is only an air valve on top, then they are NOT KX forks. If it is just an air valve (pressure release) in the center, then they are KDX / KLX, if they are Kawasaki forks.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 45
- Joined: 09:01 am Dec 09 2015
- Country:
- Location: Pittsburgh, Pa
Re: Fork/hub swap identification
Thanks Jason. It looks like there is only one screw on the of each fork (looks like a big nut maybe 27mm, and a little screw at one corner of the big nut)
Thanks,
Mario
Thanks,
Mario