How to change fork oil on inverted kx forks

Questions and comments about converting to beefier forks..
Post Reply
actmobmar
Supporting Member
Posts: 68
Joined: 06:47 am Jun 16 2015
Country:

How to change fork oil on inverted kx forks

Post by actmobmar »

How do I change the oil in kx250 forks? Do they have to be removed from the bike? Thanks
User avatar
Tedh98
Supporting Member II
Supporting Member II
Posts: 1576
Joined: 01:08 pm Mar 20 2009
Country:
Location: Atlanta, Georgia
Contact:

How to change fork oil on inverted kx forks

Post by Tedh98 »

actmobmar wrote:How do I change the oil in kx250 forks? Do they have to be removed from the bike? Thanks
What year forks? Are they open cartridge or closed cartridge forks?
actmobmar
Supporting Member
Posts: 68
Joined: 06:47 am Jun 16 2015
Country:

How to change fork oil on inverted kx forks

Post by actmobmar »

They are 2001 kx250 forks
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: How to change fork oil on inverted kx forks

Post by KDXGarage »

Yes. You will have to remove them from the bike.

There is a link to an article on fork service within these forums, but I don't have it handy. Look for KYB service.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
kawagumby
Gold Member
Gold Member
Posts: 927
Joined: 10:09 am Nov 30 2006
Country:
Location: California

How to change fork oil on inverted kx forks

Post by kawagumby »

You probably need to see a video to get the whole idea (any open chamber fork on youtube will do , IMO).
but here's the basic process:

back off both the compression and rebound adjusters to full out. If you want to use the same settings write em down.
jack the front end up and remove the wheel, brake caliper and line, fork guards, etc.
loosen the top triple clamp bolts and break the caps loose before you remove the forks.
loosen the lower clamps and remove the forks.
take the cap off, remove the spring. The cap to rod bolt-up is self-explanatory...you'll need a couple of open end wrenches. I always compress the fork now just to see what the original oil height was... oil level to top of compressed fork, it also gives you an idea how much oil to put back in as a rough estimate.

dump old oil in a pan, you can pull the rebound adjuster rod (you'll see it), sometimes I just leave it in.
pump the damping rod some to get the rest of the oil out
put the new oil in and pump the fork inner damping rod gently to fill it up (oil will eventually come out the top without bubbles) then measure and set the oil height to the top of compressed fork. I always assemble the fork now and pump the heck out of it, then recheck the oil height - sometimes there is some change.

put the forks back on.

I always reinstall the fork caps hand tight only, they are sealed with an o-ring.
Be sure and use the right torque on the lower triple clamps, over-tightening will bind the forks.
Before you tighten the axle clamps or the lower triple clamps, push down a few times on the forks with the brake applied. This will make sure that the brake rotor is in the right position and the forks are properly aligned. Bleed the air.

I'm sure I missed something, but you get the drift.
1994 KDX200, Beta 200rr, yz125, yz250, kx100 modded for adult, gasgas contact 250.
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: How to change fork oil on inverted kx forks

Post by bufftester »

+1 kawagumby...that's the best 30 second fork oil change I've read.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: How to change fork oil on inverted kx forks

Post by KDXGarage »

Look on the www.racetech.com site for their videos.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
actmobmar
Supporting Member
Posts: 68
Joined: 06:47 am Jun 16 2015
Country:

How to change fork oil on inverted kx forks

Post by actmobmar »

thanks guys, this thing rides like a truck! changing to amsoil lite5 wt oil, hopefully it will help
actmobmar
Supporting Member
Posts: 68
Joined: 06:47 am Jun 16 2015
Country:

How to change fork oil on inverted kx forks

Post by actmobmar »

what about setting the oil height? the kyb service guide touched on it, but they basically have you almost dissassemble the whole fork? i thought u could pull the spring, drain it with pumping and inverting the fork, flip it back over and put oil in, pump it and then measure the height of the oil with a long stick, etc. what is the proper height, and do i check it with the fork compressed with no spring? also, i took out a little more then 300 ml of oil out of the fork. thanks
User avatar
6 Riders
Gold Member
Gold Member
Posts: 2124
Joined: 12:58 pm May 01 2013
Country: USA
Location: Washington
Contact:

Re: How to change fork oil on inverted kx forks

Post by 6 Riders »

Measurements are taken w/o the spring. So change the oil as described above, then measure, leave it a little low if you prefer. To add oil, you can measure the amount with a syringe and fill through the bleed screw, you can remove oil the same way with the proper tool, but you won't be able to measure actual height after the fork is reassembled.
newbbewb wrote:^what he said.
masterblaster wrote:Man 6 riders you rock.
*side note...I'm drunk, so try to read what I'm trying to say, instead of what I actually type
actmobmar
Supporting Member
Posts: 68
Joined: 06:47 am Jun 16 2015
Country:

How to change fork oil on inverted kx forks

Post by actmobmar »

What is the measurement?
User avatar
kawagumby
Gold Member
Gold Member
Posts: 927
Joined: 10:09 am Nov 30 2006
Country:
Location: California

How to change fork oil on inverted kx forks

Post by kawagumby »

120 mm is a good starting point.
1994 KDX200, Beta 200rr, yz125, yz250, kx100 modded for adult, gasgas contact 250.
ohgood
Supporting Member II
Supporting Member II
Posts: 925
Joined: 10:00 am Jan 04 2014
Country:

Re: How to change fork oil on inverted kx forks

Post by ohgood »

what's the measurements for conventional?
Post Reply