KDXRIDER.NET

i have the kx 250 forks on my kdx. from what i've read it appears the kx forks are roughly an inch taller(feel free to correct me), so i remember reading on here somewhere about using taller risers so you can raise the forks enough in the tripples to correct the taller fork issue. what do you guys recommend?

You can replace them with a set of "Enduro engineering" cnc bar clamps ( that's what I use ) not only do they raise the bars but also move them forward or back whichever you prefer..... Or use the OE kdx clamps but install "Rox " risers ....these are expensive but allow you to move the bars forward, higher, or back to your liking.