1999 kx125 clamps
-
- Member
- Posts: 38
- Joined: 06:47 pm Sep 11 2014
- Country:
1999 kx125 clamps
I just purchased these on eBay for my 90 kdx200 .. Are the 99's an exact swap as far as the stem goes , or will it need machining ?
-
- Member
- Posts: 38
- Joined: 06:47 pm Sep 11 2014
- Country:
Re: 1999 kx125 clamps
Ok I found the Answer to that question , but can someone please explain what the reason is that the stem from the 125 won't work on our frame please ?
- KDXGarage
- KDXRider.net
- Posts: 14059
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1999 kx125 clamps
No. They are not an exact swap.
Here is yet another old windbag response:
The stem is a larger dimeter, with a larger diameter top bearing. No, there is not a magic bearing to make it swap.
A 1990 KDX stem will not be a snug fit into the KX lower clamp. It is off by about 7 thousandths, I think. It is too narrow. That is why people mention having the stem or clamp knurled.
Here is yet another old windbag response:
The stem is a larger dimeter, with a larger diameter top bearing. No, there is not a magic bearing to make it swap.
A 1990 KDX stem will not be a snug fit into the KX lower clamp. It is off by about 7 thousandths, I think. It is too narrow. That is why people mention having the stem or clamp knurled.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 38
- Joined: 06:47 pm Sep 11 2014
- Country:
Re: 1999 kx125 clamps
Your knowledgable windbag answer is much appreciated ! Lol
- KDXGarage
- KDXRider.net
- Posts: 14059
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1999 kx125 clamps
HA! Thanks!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128