kdx 250 1992 fork swop and lots of probs.

Questions and comments about converting to beefier forks..
Post Reply
breamy
Member
Posts: 2
Joined: 03:05 pm Nov 13 2013
Country:

kdx 250 1992 fork swop and lots of probs.

Post by breamy »

Please help firs post first enduro!!
I bought a kdx 250 f1 jap 1992 not registered to restore
Lots of problems when I firs got the bike engine was in bits
It had big end gone so hade a rod kit fitted then on closer inspection found the barrel hade be sleeved and a 88 Honda trx piston fitted.
Piston was no good found a new piston (.50) oversize then found it would accept the little end!
Hade the piston machined so we could build the engine.
All done engine ready to go in.
Now just found behind a plastic tube in-between the yolks the top of the upside down fork is well, disintegrated!
I need new forks; I can not find any kdx 250 ones
Can some one please tell me if I can fit kx 125,250 ones and what I will need
My bike is 1992 kdx 250 f1 jap import
Your help would be much appreciated as its doing my head in !!
:sad: :?
royadams
Supporting Member I
Supporting Member I
Posts: 567
Joined: 10:38 am Aug 20 2012
Country:
Location: anderson sc

Re: kdx 250 1992 fork swop and lots of probs.

Post by royadams »

Where do you live I have a set of forks
Post Reply