Got the conversion mostly done...

Questions and comments about converting to beefier forks..
User avatar
Slick_Nick
Supporting Member
Posts: 1675
Joined: 10:06 pm Oct 22 2009
Country: Canada
Location: Calgary, Alberta
Contact:

Got the conversion mostly done...

Post by Slick_Nick »

If you are more than 140lbs on the KDX, you will need to Respring the KLX forks.

Also, the KLX forks are VERY sensitive to oil level changes. Go in 10mm increments until you get a soft (not plush ride) with good bottoming resistance. I run 70mm in mine. Stock is 120mm I believe.
'00 KDX 220R
Post Reply