2003 kdx

Questions and comments about converting to beefier forks..
Post Reply
Peter Williams
Member
Posts: 14
Joined: 03:36 pm May 03 2011
Country:

2003 kdx

Post by Peter Williams »

Hey guys! I know it's probably been asked. But!!!! What year KX front end would be best to get for my 2003 KDX. I also understand that I ned the whole frontend of the KX apart from stem! I also understand that I can use the KDX caliper and brake line. Correct? Sorry to be a pain! :?
Peter Williams
Member
Posts: 14
Joined: 03:36 pm May 03 2011
Country:

Post by Peter Williams »

Also what size KX? 250, 500 or even 125? Cheers again.
User avatar
rbates9
Supporting Member II
Supporting Member II
Posts: 3164
Joined: 06:07 pm Apr 27 2010
Country:
Location: UPSTATE New York

Post by rbates9 »

There is WAY too many threads on this. You probably should do some reading. :wink:

Look for the newest forks you can find. The 500's should slip right on, the 125's and 250's are more plentiful.

125's tend to be the same forks as 250's with exception to the springs being heavier on the 250's. If your on the heavy side try to find the 250's, if your a light weight look for the 125's. If you are planing on respringing any way get the best deal you can find. :partyman:
Peter Williams
Member
Posts: 14
Joined: 03:36 pm May 03 2011
Country:

Post by Peter Williams »

Hey many thanks. Will probably try and get the 500's then and slot them on the kd clamps. Again thanks very much. :grin:
User avatar
rbates9
Supporting Member II
Supporting Member II
Posts: 3164
Joined: 06:07 pm Apr 27 2010
Country:
Location: UPSTATE New York

Post by rbates9 »

You will still need the 500 clamps and wheel.
Peter Williams
Member
Posts: 14
Joined: 03:36 pm May 03 2011
Country:

Post by Peter Williams »

Thanks. :razz:
Post Reply