KX fork setup pictures
-
- Member
- Posts: 12
- Joined: 05:02 pm Apr 26 2011
- Country:
- Location: Tewksbury, MA
KX fork setup pictures
Does anyone have any pictures of their KDX with the KX forks on them? I'd like to see some pictures of the setup. Where the shim is supposed to go mainly I guess. Just confused on that part. Hoping to get my forks on next week and try them out.
- Varmint
- KDXRider.net
- Posts: 823
- Joined: 01:33 pm Oct 27 2008
- Country:
- Location: Bristol, Connecticut
- Contact:
http://s733.photobucket.com/albums/ww33 ... 20Project/
My forks were installed before the RB new sleeve/spacer combo piece. I used the KX lock nut as the spacer I needed. So I have two lock nuts on my setup.
I think you're the same guy doing this on NEDB. If so, I live in CT and can show you the bike sometime (at a hare scramble maybe).
My forks were installed before the RB new sleeve/spacer combo piece. I used the KX lock nut as the spacer I needed. So I have two lock nuts on my setup.
I think you're the same guy doing this on NEDB. If so, I live in CT and can show you the bike sometime (at a hare scramble maybe).
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
Only shot I have of the spacer
It is pressed into the top clamp
It is pressed into the top clamp
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
-
- Member
- Posts: 12
- Joined: 05:02 pm Apr 26 2011
- Country:
- Location: Tewksbury, MA
Yup that's me. You're pictures will help me a whole lot. Hoping to have this setup before The Classic.Varmint wrote:http://s733.photobucket.com/albums/ww33 ... 20Project/
My forks were installed before the RB new sleeve/spacer combo piece. I used the KX lock nut as the spacer I needed. So I have two lock nuts on my setup.
I think you're the same guy doing this on NEDB. If so, I live in CT and can show you the bike sometime (at a hare scramble maybe).