does anyone on here know anywhere, or anyone...... that rebuilds front forks? i have a 96 200 and the forks are way to soft........ i weigh 200lbs , and they just dont want to hold me up! i just dont realy have time to do them myself......... if anyone has a set already set up for sale, i would be interested. anyone?
oh! i ride woods..... mostly rutted out stuff,roots,rocks....... with some jumps that i get around 7-8 foot high.
need my forks rebuilt!
- kdxmaniac
- Supporting Member
- Posts: 595
- Joined: 09:01 pm May 24 2010
- Country:
need my forks rebuilt!
my bikes
-------------
96 ktm 300
96 XR400R
07 hayabusa
77 kz 1000
85 goldwing 1200
02 BIG DOG PITBULL
gone but not forgotten
96 kdx 200
98 ktm 380 "because it dang near killed me!"
97 ktm 360
96 ktm 250
93 wr 250
94 dr 350s
93 kx 250
07 gsxr 1000
99 bandit 1200
-------------
96 ktm 300
96 XR400R
07 hayabusa
77 kz 1000
85 goldwing 1200
02 BIG DOG PITBULL
gone but not forgotten
96 kdx 200
98 ktm 380 "because it dang near killed me!"
97 ktm 360
96 ktm 250
93 wr 250
94 dr 350s
93 kx 250
07 gsxr 1000
99 bandit 1200
- David_L6
- Gold Member
- Posts: 235
- Joined: 01:07 am Jun 04 2010
- Country:
- Location: Northwest Louisiana
I used http://www.moto-techperformance.com/ to do our two CR250s. One was a re-build and re-valving for hare scrambles. The other was re-build, re-spring for my weight, and re-valve for hare scrambles. I had the forks and the shock done by them on both bikes.
I haven't used http://www.mx-tech.com/ yet but I plan on using them for lowering the ride height and re-valving a set of CR250 forks that I am going to install on our KDX200.
The only reason for the change in shops is due to the lowering issue.
I haven't used http://www.mx-tech.com/ yet but I plan on using them for lowering the ride height and re-valving a set of CR250 forks that I am going to install on our KDX200.
The only reason for the change in shops is due to the lowering issue.
2000 KDX200 / 2002 CR250 / 2003 CR250 / 2008 TT-R230 / 2011 Brute Force 750 / 2012 Brute Force 750 EPS